12V 24V 10A Car Battery Automatic Charger Wet Dry Lead-Acid Lithium LCD Display Smart for Truck Motorcycle Charging Battery Test

Scope of application:

The machine is suitable for charging various 12V 24V 4AH-150AH lead-acid batteries, such as car batteries, AGM start-stop batteries, lawn mower batteries, motorcycle batteries, colloid batteries, maintenage-free batteries, etc.......12V/24V Car Charger With 6 Protection Functions：

1.Overcharge protection

2.Low voltage protection

3.Over voltage protection

4.Reverse polarity protection

5.Short circuit protection

6.Temperature protection

7.Overurrent protection

Performance characteristics:

1.One-Button repair mode charging: Use high and low frequency pulses to repair powerdrained batteries .

2. Winter and summer mode: The charger automatically detects the ambient temperatureand enters the corresponding mode to ensure that it is sufficient in winter and notovercharged in summer.

3. Digital display: digital cycle displays the current voltage, current, power and ambienttemperature.

4.Short circuit protection: When the output cable of the charger is accidentally short-circuited, the machine automatically turns off .

5.Reverse connection protection: When the polarity of the output cable of the charger isreversed to the polarity of the battery, the charger will automatically turn off the output,and issue an alarm sound and a warning sign, and it will be automatically released afterthe correct connection.

6.Multi-stage charging: desulfurization mode + constant current mode + constant voltagemode + pulse mode + float mode + full automatic stop.

12V/24V Car Charger for 4-100AH Lead-acid Battery：

1.constant current mode

2.constant voltage mode

3.floating charge mode

4.Battery Repair

5.Smart chip (fully charged automatic stop)

6.Automatic fan cooling

12V/24V Car Charger with Automatic Cooling Function ：

When the device is turned on, the fan will automatically start to cool the device

User Instructions
1.Connect the power.
2.After the machine is turned on, press the button to select the desired charging mode.

3.The red clip wire is connected to the positive pole.4.The black clip is connected to the negative pole.After the wire is connected, themachine starts charging on its own.

After the battery is correctly connected, the screen will display "PUL" and the repair icon will flash. The machine will enter the pulse repair state. After 8 hours, it will turn to float and charge, showing "FUL".Package List

1 x 12V/24V 10A Intelligent Charger
1 x Manual